Success Stories
Success Stories Page
Success Story > IEC (Israel Electrical Company), IT Division
Our Activities at IEC
Gap analysis of Configuration Management (CM) practices including processes, CM software tools and their interface with the CAD systems and Data transfer among design departments.
Pnina Sofrin, Head of PLM Project, tells about our common work
I would like to express my deep appreciation to your work in the Configuration
Management Project.
During our common work I feel that on every meeting I learn new subjects from you. The referrers from the Engineering Division expressed their satisfaction from both your high professionality and your pleasant and personal method to handle the challenges.
Success Story > IEC (Israel Electrical Company), Engineering and Projects Division
Our Activities at IEC
Gap analysis of Configuration Management (CM) practices including processes, CM software tools and their interface with the CAD systems and Data transfer among design departments.
Based on the Gap Analysis we led the process of CM practices improvement.
Malka Segal, CM and PLM referrer, Engineering and Projects Division, tells about
our common work
It is much more than "know how" and professional consultancy. Many consultants "leave" the customer, while CM4PLM takes the lead and navigates the project. Meir prepared procedures and other documents in order to accelerate the project's progress. CM4PLM and Meir in particular have very good relations with the PLM Provider and with other PLM customers.
Success Story > Solel, Solar Energy
Our Activities at Solel
Gap analysis, preparation of PLM URS (User Requirements Specification), supporting the selection process which includes Business Case for PLM Providers evaluation and Decision table. CM4PLM supported Solel during the implementation phase.
Shuki Alkelay, Company's PMO and PLM Project Leader, tells about our common work
On many occasions we had to invest a lot of working hours in order to clarify our work methods. Working with Meir from CM4PLM it wasn't necessary, I classify him in a very
high level compared to other consultants. High professionality, but that's not the main issue, Meir is a long distance runner who has a good view of the entire project. A consultant that prepared documents such as Conversion Design, ATP and ATR, thus providing to the Project team time for other activities.
Success Story > Audiocodes, Telecommunication
Our Activities at Audiocodes
Gap analysis, preparation of PLM URS (User Requirements Specification), process improvement, supporting the selection process which included Business Case for PLM Providers evaluation and Decision table .
CM4PLM supported Audiocodes during the implementation phase.
Yaacov Sokolovsky, head of Engineering Department, tells about our common work
I asked Meir from CM4PLM to support Audiocodes PLM Project based on my previous experience while working together at ECI. Meir is very professional, expressing very deep knowledge in R&D and Engineering processes. The relations with Meir were very close, he did all the efforts to supply high quality products.
Meir supported us during the implementation, he was a kind of "policeman" who made sure that we got all the functions according to the URS.
Our work with Meir was above our expectations, therefore I will be glad to work together again.
Success Story > VERAZ, Networks Inc. is a provider of application, control and bandwidth optimization solutions
Our Activities at VERAZ
Gap analysis, preparation of PLM URS (User Requirements Specification) including processes improvement.
Mony Nachum, Head of Operation (VP), tells about our common work
CM4PLM provided all the deliverables as outlined in the contract efficiently and rapidly. High professionality, excellent knowledge of leading PLM systems provided us with aspects which were not outlined in the contract. High quality products and very personal approach, including changes "not according to the book" which we asked for.
Success Story > ECI, Tellecommunication
Our Activities at ECI
ERP project, preparation of PLM URS (User Requirements Specification) including processes improvement, including collaboration with other ECI sites and subcontractors, cost evaluation and logistics considerations. CM4PLM supported the selection process which includes Business Case for PLM Providers evaluation and Decision table. CM4PLM supported ECI during the implementation phase.
Zeev Abramovich, Head of Engineering Projects in IT, tells about our common work
Meir from CM4PLM and I worked together on a PLM project including interfaces with ERP system.
My impression is that Meir has deep understanding in R&D and Engineering processes and deep knowledge of all PLM aspects. Deliverables were provided on time, in spite of the great risk the PLM and the interfaces with ERP went life on time thanks to Meir's efforts.
After ending the project I am still happy to have Meir's opinion regarding PLM processes.
Success Story > Military Unit
Our Activities at the Military Unit
Gap analysis, preparation of PLM URS (User Requirements Specification) and process improvement. Based on the URS we provided a comparison between leading PLM solutions.
Head Engineering and PLM Projects in IT, tells about our common work
Professionality is the basis for this kind of work, good acquaintance with PLM solutions, huge experience and objective approach toward PLM solutions. Meir initiated activities such as visiting existing Customers of PLM although it was not part of our agreement.
Success Story > LUMENIS, Medical Devices
Our Activities at LUMENIS
Gap analysis which included regulation aspect in accordance with 21CFR Part 11 and 21CFR Part 820, preparation of PLM URS (User Requirements Specification) including NPI and QM, supporting the selection process which included Business Case for PLM Providers evaluation and Decision table.
CM4PLM supported LUMENIS during the implementation phase it included OQ and PQ (Verification and Validation tests) documents preparation and leading test conduct.
Danny Sharon, Head of Doc Control tells about our common work
Professionality
–
LUMENIS designs and manufactures Medical Devices, which is a very unique discipline. Meir' knowledge was a significant added value beyond the predefined mission of PLM project.
Customer Oriented
–
On many occasions PLM providers try to influence the URS content. Meir's focus was only on Customer's needs, we trusted all his activities.
Leadership –
Meir has the ability to lead the project in spite of objections within the company.
Success Story > Hadera Paper Mills
Our Activities at Hadera Paper Mills
Preparation of PLM URS (User Requirements Specification) including processes improvement, including collaboration between sites and collaboration with design activities. CM4PLM supported the selection process which includes Business Case for PLM Providers evaluation and Decision table.
CM4PLM prepared the implementation plan and supported Hadera Paper Mills during the implementation phase.
Guy Barash, Head of Engineering Department tells about our common work
It is important to notice that our requirements are unique to the heavy process industry. Meir from CM4PLM learned very quickly our unique needs and shared with us his experience and knowledge from previous PLM implementations. Meir's support during the PLM implementation was very helpful.
I enjoyed the period we worked together and I am sure that we will work together in the future.
Success Story > Alliance Tire Group, Israel
Our Activities at Alliance
Preparation of PLM URS (User Requirements Specification) including process improvement. CM4PLM supported the selection process which includes Business Case for PLM Providers evaluation and Decision table.
Vered Giladi, Head of IT tells about our common work
Meir from CM4PLM has excellent skills in the area of system analyses; he is professional who provided services beyond our expectations.
The solution took into consideration unique Alliance needs and organizational
constraints, very patient and high level of service awareness.
Success Story > EDCO, Electrical Equipment
Our Activities at EDCO
Configuration Management (CM) gap analysis, recommendation for CM practices improvement and preparation of CM procedures based on the improved processes.
Yoni Hariry, Head of Engineering Department tells about our common work
My acquaintance with Meir from CM4PLM started when I participated in Configuration Management (CM) course. During the course I realized Meir's professionality regarding Configuration Management, I was impressed from his knowledge regarding international CM standards. Following the course I initiated, together with Meir CM processes improvement. Friendly relations with EDCO's employees together with professionality and service awareness helped us to achieve our goals.
I strongly recommend on CM4PLM services regarding CM and PLM.
Success Story > VERIFON, Israel
Our Activities at VERIFON
Preparation of PLM URS (User Requirements Specification) including process improvement. We focused on NPI end to end processes. CM4PLM supported VERIFON during the implementation phase
Olga Melavsky, Head of Configuration Management team tells about our common work
PLM implementation is not easy task at all. Working with Meir from CM4PLM made the implementation a professional experience. Meir is a kind of consultant that helped us to efficiently implement the PLM including deployment of new processes, taking into consideration conflicting views among different organizational units.
Success Story > Maytronics, Robots for Swimming Pool
Our Activities at Maytronics
Configuration Management Course at Maytronics.
Elnor Yosef Maimoni and Yasmin Yaacov from the CM team tell about the course we conducted at maytronics
In scale of one (1) to five (5) we scored the CM training as follows : training met our expectations – 5, effective presentations – 5, material is professional – 5, Lecturer – 5.
Elinor added : Very pleasant lecturer, professional, patient, I enjoyed the training, wonderful ("achla") lecturer.
Success Story > TEFRON, Fashion
Our Activities at Tefron
Preparation of PLM URS (User Requirements Specification) including process evaluation, including ATP and tests conduct. CM4PLM implemented the Infor PLM at Tefron.
Igal Funk, Head of IT Department tells about our common work.
We are deeply impressed from the fact that Meir and Moshe from CM4PLM learned soquickly the fashion industry focusing on Tefron needs. Although they have huge experience regarding PLM system it is not straight forward that they learned in short time
the Infor PLM and implemented it on time.